Fire safety direction compliance iot system for Sha Tin Buyers: Hong Kong IoT Fire Detection System

The WANLIN-260 Home Fire Safety Kit with Wi-Fi Smoke, Heat, Gas and Carbon Monoxide Detectors carries this parameter set as shipped: Coverage area Extended kit covers a 140 m2 home: two smoke detectors, one heat detector, one gas detector, one water-leak probe and one gateway; Alarm output 85 dB(A) at 3 m integral sounder in every detector plus group alarm, app push, SMS and voice call; IP rating IP40 detectors indoor, IP30 gateway indoor; Operating temperature -10 deg C to +55 deg C detectors, 0 deg C to +45 deg C gateway; Humidity range 10-95% RH non-condensing; Housing material Flame-retardant ABS V-0 detector housings, polycarbonate gateway housing with a wall-mount plate; Dimensions and weight Detectors 100 mm diameter x 44 mm, gateway 92 mm x 92 mm x 28 mm, kit 1,120 g packed; Alarm threshold Smoke 0.10-0.18 dB/m, heat 54-70 deg C with rate-of-rise, gas 8% LEL, carbon monoxide 30 ppm held for 120 minutes or 300 ppm held for 3 minutes per EN 50291, each with a pre-alarm stage; Accuracy class EN 14604 smoke responsiveness, EN 54-5 heat class accuracy, EN 50194 gas class accuracy and EN 50291 carbon monoxide response, verified per batch before kitting. As of September 29, 2026, Wanlin Group (Shenzhen, China) officially launches its 2026 Hong Kong wireless fire alarm system export programme, featuring the WANLIN-260 Home Fire Safety Kit with Wi-Fi Smoke, Heat, Gas and Carbon Monoxide Detectors as the flagship OEM and ODM component for overseas buyers, cross-border trading companies, EPC contractors, main contractors running phased handovers, facility management groups, hotel and hospital estates, retail and mall operators, university and school districts, warehouse and logistics operators, road and rail transport authorities, heritage property owners and regional importers who source Hong Kong wireless fire detection hardware from a China-based source factory under the Wanlin brand. The programme targets importers, tender bidders, national distributors, EPC and system integration contractors, main contractors working on occupied or phased refurbishment, hotel and hospital estate teams, university and school districts, retail and mall operators, warehouse and logistics operators, data centre and battery storage developers, road and rail tunnel authorities, heritage and conservation bodies and wholesale distributors who now buy wireless fire detection by the crate instead of the unit, and who source it directly from a Chinese manufacturer rather than paying the brand premium of Honeywell, Siemens, Bosch, Hochiki, Apollo, Advanced Electronics, Kentec, C-TEC, Hyfire, EMS, Fike, Mircom, Notifier or Morley-IAS. Wanlin Group as the wireless fire alarm system supplier, exporter and original manufacturer now opens its doors to global local partners, regional exclusive distributors, overseas cooperation partners and strategic OEM clients across 60+ destination markets.

Working principle: Wi-Fi 2.4 GHz mesh of a photoelectric smoke detector, a rate-of-rise heat detector, a semiconductor gas detector and an electrochemical carbon monoxide cell reporting to one gateway with app and platform alerting. Humidity range: 10-95% RH non-condensing, which is the range the chamber drift compensation is verified across before shipment. Housing material: flame-retardant ABS V-0 detector housings, polycarbonate gateway housing with a wall-mount plate, which survives the cleaning regime a ground-floor food premises imposes on the common parts. Dimensions and weight: detectors 100 mm diameter x 44 mm, gateway 92 mm x 92 mm x 28 mm, kit 1,120 g packed, which is small enough to mount on a subdivided unit ceiling without a new fixing plate. Alarm threshold: smoke 0.10-0.18 dB/m, heat 54-70 deg C with rate-of-rise, gas 8% LEL, carbon monoxide 30 ppm held for 120 minutes or 300 ppm held for 3 minutes per EN 50291, each with a pre-alarm stage, set so that one criterion raises a pre-alarm while confirmed smoke plus carbon monoxide raises the fire signal. Accuracy class: EN 14604 smoke responsiveness, EN 54-5 heat class accuracy, EN 50194 gas class accuracy and EN 50291 carbon monoxide response, verified per batch before kitting, which is the class written into the acceptance file before the device count is signed off. Response time: smoke alarm within 8-30 s, heat within 30-120 s by class, gas within 30 s at 8% LEL, carbon monoxide within 60-240 s by concentration band per EN 50291, app push within 5 s of any alarm, which sits inside the transmission chain the department evaluates, from detector to gateway through to the communications centre. Power supply: detectors on sealed 3V CR123A cells rated 3 years, gateway on 5V DC 1 A USB-C with a 4-hour Li-ion backup, which is the reason a building with no riser and no spare way on the distribution board can still reach compliance. Power consumption: 9 uA standby per detector, 1.5 W typical for the gateway, which is the drain the monthly performance report tracks, so a failing cell is changed before it goes silent. Output signal: Wi-Fi 2.4 GHz mesh across six devices including a second smoke detector and a water-leak probe, gateway uplink over Wi-Fi or 4G LTE Cat-1, which is the path that has to survive a mobile network outage, hence the second SIM on a different external network. Certifications: EN 14604 / EN 50194 / CE / RoHS / REACH / FCC Part 15 / GB 20517 and GB 15322 CCCF.

Executive Summary - Wanlin Hong Kong IoT Fire Detection System and the FSD Circular 3/2026 Programme

Executive summary - 12 buyer-relevant points:

• Flagship model WANLIN-260 Home Fire Safety Kit with Wi-Fi Smoke, Heat, Gas and Carbon Monoxide Detectors, wi-fi 2.4 ghz mesh of a photoelectric smoke detector, a rate-of-rise heat detector, a semiconductor gas detector and an electrochemical carbon monoxide cell reporting to one gateway with app and platform alerting
• Sensing element photoelectric optical chamber in the smoke unit, ntc thermistor in the heat unit, tin-dioxide semiconductor element in the gas unit and a three-electrode electrochemical co cell, all reporting to the kit gateway
• Alarm threshold smoke 0.10-0.18 db/m, heat 54-70 deg c with rate-of-rise, gas 8% lel, carbon monoxide 30 ppm held for 120 minutes or 300 ppm held for 3 minutes per en 50291, each with a pre-alarm stage
• Accuracy and response en 14604 smoke responsiveness, en 54-5 heat class accuracy, en 50194 gas class accuracy and en 50291 carbon monoxide response, verified per batch before kitting / smoke alarm within 8-30 s, heat within 30-120 s by class, gas within 30 s at 8% lel, carbon monoxide within 60-240 s by concentration band per en 50291, app push within 5 s of any alarm
• Power and consumption detectors on sealed 3v cr123a cells rated 3 years, gateway on 5v dc 1 a usb-c with a 4-hour li-ion backup / 9 ua standby per detector, 1.5 w typical for the gateway
• Output signal wi-fi 2.4 ghz mesh across six devices including a second smoke detector and a water-leak probe, gateway uplink over wi-fi or 4g lte cat-1
• Coverage and notification extended kit covers a 140 m2 home: two smoke detectors, one heat detector, one gas detector, one water-leak probe and one gateway / 85 db(a) at 3 m integral sounder in every detector plus group alarm, app push, sms and voice call
• 16 wireless fire alarm and companion hardware families from one factory: WANLIN-860 control panels to EN 54-2 and EN 54-4, WANLIN-868D LoRa gateways with Ethernet, Wi-Fi and 4G backhaul, WANLIN-307 and WANLIN-309 IoT smoke detectors on LoRaWAN, NB-IoT and 4G LTE Cat-1, WANLIN-303 standalone smoke alarms with 433 MHz interconnect, WANLIN-340 rate-of-rise heat detectors to EN 54-5, WANLIN-222 resettable call points to EN 54-11, WANLIN-656 sounder strobes to EN 54-3 and EN 54-23, WANLIN-705 electrical fire monitors, WANLIN-770 pressure gauges, WANLIN-780 water level meters, WANLIN-365 combustible gas detectors, WANLIN-260 home fire safety kits, WANLIN-710 smart breakers, the A119-YW detector tester and the WANLIN-620 IoT fire detection system retrofit package on the same radio network
• MOQ 200 pcs, lead time 20-28 days, EXW / FOB Shenzhen / CFR / CIF / DDP supported, 36 months warranty
• Flagship field reference School annexe awaiting an improvement grant, Tsing Yi Heung Sze Wui Road, Kwai Tsing, Hong Kong SAR: A three-storey annexe used for storage and two classrooms, occupied during term and shutte.
• Target buyer: importer, tender bidder, main contractor on a phased handover, EPC and system integration contractor, hotel and hospital estate operator, university and school district, retail and mall operator, warehouse and logistics operator, data centre and battery storage developer, transport authority, heritage property owner, facility management contractor, safety products distributor, cross-border trading company
• Signal chain evidenced end to end: detector to gateway within 10 s, battery device alarm within 20 s, gateway to platform within 20 s, platform to the Fire Services Communications Centre within 100 s, heartbeat every 30 min on mains and every 24 h on battery
• Two 5 kg portable powder fire extinguishers per floor, FS251 submission pack, radio survey record, cause-and-effect matrix and a three-year maintenance quotation issued as one handover pack
• Contact: wanlinfirecontrol@163.com / +8613261677119 / www.wanlinfire.com

This article is written for B2B buyers in Sha Tin, Hong Kong SAR who judge a IoT fire detection system package on availability rather than on features: how much radio margin each device carries after the last partition went up, how many years of real duty the cell gives at the site temperature, how quickly the platform names the device and its exact location, and whether an investigating person can hold the general alarm long enough to check without missing a real fire. Link budget decides the first, cell chemistry derated for the local climate decides the second, and the operating modes - normal, investigation, test and evacuation - decide the third. Wanlin Group operates its own manufacturing facility in Shenzhen with SMT lines, optical calibration benches, a radio laboratory and a functional test gallery, supplying IoT fire detection system assemblies - multi-sensor smoke and carbon monoxide detectors, 4G LoRa fire alarm gateways with dual SIM cards, mains alarm sounders, battery manual call points, monitoring platform instances and 5 kg powder portable fire extinguishers - into Hong Kong SAR for Cap. 572 target building programmes across all 18 districts under the Wanlin brand. Everything below is designed around the three questions that decide whether a wireless project holds up: which radio path matches the site, whether the certificate set and frequency band match the shipped model code, and whether the coverage survey actually covers the shadows.

What Is a Hong Kong IoT Fire Detection System (IoT FDS) under FSD Circular Letter No. 3/2026?

An IoT fire detection system, abbreviated IoT FDS, is the complete fire detection and alarm arrangement accepted by the Hong Kong Fire Services Department under Circular Letter No. 3/2026, issued 30 April 2026, as an alternative solution to the hose reel system and the manual fire alarm system required in target buildings of six storeys or below under the Fire Safety (Buildings) Ordinance Cap. 572. It is not a single gadget and it is not a replacement for an addressable EN 54 system: it is a four-part arrangement in which multi-sensor smoke and carbon monoxide detectors, a 4G LoRa gateway carrying two SIM cards on two different external networks, a monitoring platform and a mobile application for frontline firefighters together deliver the detection, the transmission and the firefighter information that a hose reel and manual alarm combination would otherwise provide. Only those two items are replaced. Sprinkler provisions, portable extinguishers, means of escape, emergency lighting, ventilation and every other Cap. 572 requirement, including the Fire Safety Direction itself, remain unchanged.

For a buyer in Sha Tin, Hong Kong SAR, the definition reduces to five statements that can each be tested on site rather than read off a brochure. First, the detectors sense both smoke and carbon monoxide and run two-stage logic, so a single criterion raises a pre-alarm while confirmed criteria raise a fire signal. Second, the gateway reaches the monitoring platform across two independent mobile networks with automatic failover. Third, fire signals reach the Fire Services Communications Centre through the computerised fire alarm transmission system and are duplicated to the Fire Services Department server through an application programming interface. Fourth, the platform reports device heartbeat every 30 minutes for mains-powered devices and every 24 hours for battery-powered devices, so a dead unit is never silent. Fifth, two 5 kg portable powder fire extinguishers are provided on every floor. The WANLIN-260 Home Fire Safety Kit with Wi-Fi Smoke, Heat, Gas and Carbon Monoxide Detectors supplied by Wanlin Group is engineered to that definition, with Wi-Fi 2.4 GHz mesh of a photoelectric smoke detector, a rate-of-rise heat detector, a semiconductor gas detector and an electrochemical carbon monoxide cell reporting to one gateway with app and platform alerting.

Hong Kong IoT Fire Detection System Market Overview and Cap. 572 Buyer Demand

Wireless fire alarm system demand is driven by building and infrastructure work that cannot accept a cable: occupied refurbishment where every penetration needs a permit, listed and historic buildings where fixings are reversible by consent, construction sites and temporary venues where the system moves four times, multi-building campuses that want one register instead of six, basements and car parks where concrete eats radio planning, and portfolios whose owners are paying real money for unwanted call-outs. Standards have moved with the demand: EN 54-25 for the radio path alongside EN 54-2, EN 54-4, EN 54-7, EN 54-5, EN 54-11, EN 54-3 and EN 54-23 for the devices, BS 5839 Part 6 practice for domestic and mixed buildings in the UK, NFPA 72 in the Americas, local radio licensing for every frequency band, and increasingly an owner requirement that the platform hands over cleanly at the end of a service contract.

Market access in Sha Tin, Hong Kong SAR is anchored on submission bundle for Sha Tin District: the computerised fire alarm transmission system interface note, the application programming interface handover statement for the Fire Services Department server link, the EN 54 type-test file, the OFCA documentation for the dual SIM 4G failover path and the per-floor detector schedule the registered contractor signs off. Multi-sensor smoke and carbon monoxide detectors, 4G LoRa fire alarm gateways with dual SIM cards, mains powered alarm sounders, battery manual call points and the 5 kg powder portable fire extinguishers are shipped into Sha Tin, Hong Kong SAR on one HS-coded packing list: the Fire Services Department submission file, the OFCA short-range device documentation, the EN 54 type-test references, the CE and RoHS declarations and the per-unit battery autonomy record travel with the pallet, so the registered fire service installation contractor signs the FS251 certificate without a second shipment or a re-test at destination, which requires a documented conformity route, a declaration referencing EN 54-2, EN 54-4 and EN 54-25 as applicable, a radio band approval matched to the shipped model code and third-party approval body involvement where the scheme demands it. Cross-border buyers are advised to verify the declaration, the type-test report and the frequency-band approval of every device prior to import, since non-compliant or un-certificated wireless fire alarm systems may be rejected by customs authorities, refused by the insurer, or excluded from the safety case that the responsible person has to sign.

Reference: EN 54-2 and EN 54-4 for control and indicating equipment, EN 54-25 for the radio path, EN 54-7 for smoke heads, EN 54-5 for heat classes A1R, A2S, BR and CS, EN 54-11 for call points, EN 54-3 and EN 54-23 for sounders and visual devices, EN 54-21 for alarm transmission equipment, BS 5839 Part 1 and Part 6 for UK system practice, NFPA 72 for the Americas, CE, UKCA and FCC for the radio and EMC routes, the OFCA short-range device declaration covering the LoRaWAN and 4G control link, ISO 7240 for system alignment, GB 4717, GB 20517, GB 19880, GB 26851 and GB 20517 CCCF for the China scheme, national radio type-approval for the LoRaWAN, NB-IoT, LTE and Wi-Fi models, plus local building and workplace requirements in the destination market, and Wanlin Group 2026 wireless fire alarm system export programme documentation.

IoT Fire Detection System Engineering - Radio Planning, Battery Autonomy and Two-Stage False-Alarm Immunity

The WANLIN-260 Home Fire Safety Kit with Wi-Fi Smoke, Heat, Gas and Carbon Monoxide Detectors is engineered inside a four-layer wireless fire alarm architecture rather than as an isolated device: (1) a sensing layer using dual-criteria smoke and heat elements with coincident confirmation, because most unwanted activations come from steam, cooking and dust rather than from faults; (2) a radio layer with a declared link budget and a frequency plan legal for the destination band, because a device that reaches the gateway by 3 dB is a device that stops reaching it the day someone installs a steel partition; (3) a power layer choosing per site between wide-input mains with a declared ride-through time and lithium cells whose service life is quoted for the local temperature rather than for a laboratory bench; and (4) an evidence layer holding the event log, per-device battery and signal history and weekly server backups, because the insurer, the enforcing authority and the maintenance contractor all argue less when the data series is attached to the file. Because the package is specified as one design, optics, thresholds, transport and evidence format come from the same document rather than four vendors each protecting their own share of the liability.

Three sub-modules define the engineering depth:

• Sensing layer - Photoelectric optical chamber in the smoke unit, NTC thermistor in the heat unit, tin-dioxide semiconductor element in the gas unit and a three-electrode electrochemical CO cell, all reporting to the kit gateway. Smoke 0.10-0.18 dB/m, heat 54-70 deg C with rate-of-rise, gas 8% LEL, carbon monoxide 30 ppm held for 120 minutes or 300 ppm held for 3 minutes per EN 50291, each with a pre-alarm stage holds the alarm decision across steam, cooking aerosol, dust loading and slow developing fires.
• Power and signal interface - Detectors on sealed 3V CR123A cells rated 3 years, gateway on 5V DC 1 A USB-C with a 4-hour Li-ion backup. Wi-Fi 2.4 GHz mesh across six devices including a second smoke detector and a water-leak probe, gateway uplink over Wi-Fi or 4G LTE Cat-1 plus 9 uA standby per detector, 1.5 W typical for the gateway covers mains powered builds, battery builds and every output from a dry contact to a cellular uplink.
• Alarm output and enclosure - 85 dB(A) at 3 m integral sounder in every detector plus group alarm, app push, SMS and voice call. Extended kit covers a 140 m2 home: two smoke detectors, one heat detector, one gas detector, one water-leak probe and one gateway coverage plus IP40 detectors indoor, IP30 gateway indoor housing keeps basements, corridors, plant rooms and exposed decks protected and serviceable.

Featured Model - WANLIN-260 Home Fire Safety Kit with Wi-Fi Smoke, Heat, Gas and Carbon Monoxide Detectors Technical Signature

The featured model is WANLIN-260 Home Fire Safety Kit with Wi-Fi Smoke, Heat, Gas and Carbon Monoxide Detectors, part of the Home Fire Safety Kit - Wi-Fi Smoke, Heat, Gas and Carbon Monoxide Detectors with Gateway family, configured as the wi-fi extended kit (2 variant). FOB Shenzhen reference price is $68.00 per piece at MOQ 200 pcs, with bulk tier pricing ranging $59.16-$75.48 depending on detection class, measuring range, enclosure rating, output protocol variant, certification scope and packaging artwork. Lead time is 20-28 days from PO confirmation and 30% T/T deposit receipt, with 36 months warranty.

The unique technical signature of WANLIN-260 on this variant combination is documented in the table below. Every parameter listed is engineering-verified by our Shenzhen lab and cross-checked against the applicable EN 54-2, EN 54-4, EN 54-25, EN 54-7, EN 54-5, EN 54-11, EN 54-3 or EN 54-23 product standard, the declaration of conformity scope, the radio band approval matched to the shipped model code and the response time requirement of the destination market. Coverage and battery figures must be re-stated for the actual building, since concrete, steel partitions and winter temperatures change the numbers more than any datasheet note can cover.

Signal Chain and Response Timing - From Detector to the Fire Services Communications Centre

Buyers comparing quotations should read the signal chain rather than the datasheet. The chain below is the one Wanlin engineers against for Sha Tin target buildings, and it is the same chain the department evaluated when it recorded zero false alarms, 100 percent device availability and a heartbeat compliance figure above 99.95 percent across the ten pilot buildings in the first quarter of 2026. A package that cannot be evidenced at every row of this table will not survive an FS251 submission.

Every WANLIN-260 Home Fire Safety Kit with Wi-Fi Smoke, Heat, Gas and Carbon Monoxide Detectors shipped into the programme is provisioned against that chain before it leaves Shenzhen: SIM profiles loaded and tested, the platform tenant created, the heartbeat class set to match the power source, the cause-and-effect matrix exported as a PDF, and the device serial register issued in the same format the maintenance contractor will use for the next three years.

Application Scenarios across Hong Kong Tenements, Subdivided Flats, Village Houses and Old Estates

Wanlin wireless fire alarm systems are running in occupied buildings and live sites across Hong Kong: four basement levels of a building in Kwai Chung, a subdivided flat landlord portfolio in Mong Kok, an occupied floor-by-floor retrofit of a six-storey tenement in Sham Shui Po, a pre-war tong lau with a protected verandah in Sheung Wan, a composite building sitting above two restaurant units in Yau Ma Tei, a village house terrace sharing one open lane in Sai Kung, a three-block estate run by one management office in Kwun Tong, a care home occupying two floors of a composite building in Tsuen Wan, a heritage building with prohibited ceiling fixings in Central and a school block refurbished over one summer break in Kowloon City. Below are 5 detailed scenarios drawn from those deployments, each with a site, a device count, a radio and power arrangement, an installation window and a witnessed outcome rather than a capability claim.

Scenario 1: School annexe awaiting an improvement grant, Tsing Yi Heung Sze Wui Road, Kwai Tsing, Hong Kong SAR. A three-storey annexe used for storage and two classrooms, occupied during term and shuttered in the summer. The problem is not detection, it is evidence: the grant file needs a cost breakdown the scheme will accept, so the quotation was split into device supply, installation, transmission service and maintenance rather than bundled into one line, which is what allowed the application to be assessed at all. Fault triage on this site resolved 1 events in 8 months, of which the two that reached a full investigation were traced to dust ingress during ceiling works, and the platform never raised a supervisory fault that turned out to be a real device failure.

Scenario 2: Six-storey target building under a standing Fire Safety Direction, Lai Chi Kok Road, Sham Shui Po, Hong Kong SAR. The block went up in 1961, six storeys over one shop unit, and it has never had a riser. The owners' committee priced a hose reel system at HK$610,000 and stopped when the structural engineer capped roof tank loading at 1.8 tonnes in writing. What went in instead: one multi-sensor smoke and carbon monoxide detector inside each of the eleven flats near the main entrance, one on each of the six common landings, one 4G LoRa fire alarm gateway per floor in the staircase carrying its integrated manual call point and alarm sounder, and two 5 kg powder portable extinguishers per landing. The commissioning engineer deliberately pulled the primary SIM card on the third-floor gateway during handover: the box re-registered on the second operator in 41 s and the fault-to-restore pair landed on the platform inside the 20 s fault window, which is the number the registered fire service installation contractor needed before signing the FS251 certificate on day twelve. Spares holding for this site sits at 10 percent of the installed population, sized against a 12-month battery replacement round rather than a full panel swap.

Scenario 3: Composite building with two food premises on the ground floor, Reclamation Street, Yau Ma Tei, Hong Kong SAR. Five storeys of flats above two restaurant units that run a wok station from eleven in the morning until ten at night. Cooking aerosol is exactly what turns a single-criterion optical chamber into a nuisance appliance, so the ground floor got rate-of-rise heat detectors to EN 54-5 class A1R rather than smoke units, and the residential floors got dual-criterion smoke plus carbon monoxide heads on the two-stage logic. Aerosol without a carbon monoxide rise stops at pre-alarm: it reaches the platform and the owners' mobile group and does not mobilise the fire services. Six months of platform logs show five pre-alarms, four of them traced to hood filter cleaning on the same Sunday afternoon, and zero fire alarms transmitted to the Fire Services Communications Centre. Fire brigade liaison accepted the WANLIN-260 cause-and-effect matrix after a witnessed test across 144 devices, with the investigation hold set to 5 minutes to suit the local response plan.

Scenario 4: Subdivided flat floor plate, Sai Yeung Choi Street South, Mong Kok, Hong Kong SAR. One 1980s floor plate cut into six self-contained units, each with a kitchenette and its own electricity meter. Six wired circuits would have needed a ceiling opening per unit and a common power source the building does not have, so the design went wireless and the radio survey decided the gateway count: the new partitions cost 9 dB per wall, and two gateways on the second and fifth floor landings carry eighteen devices with 14 dB of margin against the 12 dB floor the factory sets. Each unit is its own alerting zone on the platform. That matters more than it sounds - six kitchenettes on one plate generate enough aerosol between seven and eight in the evening to clear the whole floor under single-criterion logic, and under per-unit zoning it produces a pre-alarm to one tenant instead. Fault triage on this site resolved 4 events in 20 months, of which the two that reached a full investigation were traced to dust ingress during ceiling works, and the platform never raised a supervisory fault that turned out to be a real device failure.

Scenario 5: Village house row with no owners corporation, Tai Om Village, Tai Po, Hong Kong SAR. Three village houses sharing a lane, no management entity, no common supply and no appetite among the owners for a shared electricity account. Everything above the gateway layer runs on sealed three-year lithium cells with a twenty-four hour heartbeat, and the two gateways are mains fed from whichever house has a spare fused way, with the cost split three ways. The lane is open to rain, so the detectors and call points are the IP67 variant throughout and the extinguishers sit in wall brackets under the eaves rather than inside the houses. The platform splits the cluster into per-house zones with separate SMS recipients, because a fire signal going to an owner who lives in Kowloon helps nobody who is standing in the lane. Spares holding for this site sits at 9 percent of the installed population, sized against a 24-month battery replacement round rather than a full panel swap.

Scenario 6: Building in a pilot-scheme district, Hill Road, Sai Wan, Central and Western District, Hong Kong SAR. Central and Western was one of the ten districts covered when the Fire Services Department installed IoT fire detection systems in ten selected target buildings of six storeys or below in the fourth quarter of 2025 and evaluated them from 1 January to 31 March 2026. The published results were zero false alarms, 100 per cent system availability and better than 99.95 per cent effective component operation. A building on this street runs the same pattern the pilot measured: mains-fed common-area devices reporting heartbeat every 30 minutes, battery devices every 24 hours, fault within 20 s and status within 100 s, with the main contractor filing a monthly performance report that is the document the department actually reads rather than the commissioning certificate. Fire brigade liaison accepted the WANLIN-260 cause-and-effect matrix after a witnessed test across 183 devices, with the investigation hold set to 8 minutes to suit the local response plan.

Installation, Commissioning and Handover Checklist for Hong Kong Target Buildings

The two-week programme the department quotes is achievable because almost none of the work touches the structure. The sequence below is the one Wanlin project teams hand to the registered fire service installation contractor, and it is written so that a WANLIN-260 Home Fire Safety Kit with Wi-Fi Smoke, Heat, Gas and Carbon Monoxide Detectors installation can be evidenced line by line at FS251 stage instead of being reconstructed from memory.

1. Stage 1 - desktop survey. Floor plans, tenancy split and construction type are read against the target building definition, and the detector count per floor and per unit is fixed here rather than on a ladder. Subdivided units are counted as separate units, not as rooms.
2. Stage 2 - radio survey. A walk test with a portable gateway records received signal strength at every planned device position. Where margin is short the answer is an extra gateway, never a detector moved off the position the coverage model needs.
3. Stage 3 - device mounting. Detectors are fixed to the structural soffit on the supplied plate. A IP40 detectors indoor, IP30 gateway indoor enclosure and a -10 deg C to +55 deg C detectors, 0 deg C to +45 deg C gateway operating window keep plant rooms, open corridors and unconditioned staircases inside the same specification.
4. Stage 4 - gateway and dual SIM commissioning. Two SIM cards from two different external networks are loaded, the failover is witnessed by deliberately disabling the primary network, and the switch-over time is written into the test record instead of being assumed.
5. Stage 5 - functional test without a live fire. Every detector is proven with certified test aerosol or a magnet key, the alarm is walked end to end to the monitoring platform and on to the transmission link, and sound pressure is recorded with a calibrated meter at the agreed reference distance.
6. Stage 6 - heartbeat and battery audit. The platform runs a full 24 hour cycle so both heartbeat classes are observed on the live network, and any device reporting late is resolved before handover rather than during the defects period.
7. Stage 7 - extinguisher and signage walk. Two 5 kg portable powder extinguishers are mounted on every floor, positions are photographed against the floor plan, and the extinguisher schedule is attached to the submission file.
8. Stage 8 - documentation pack. FS251 application, cause-and-effect matrix, radio survey record, device serial register, battery replacement forecast and a three-year maintenance quotation are issued as one pack for Sha Tin, Hong Kong SAR.
9. Stage 9 - training and handover. The responsible person, the management office and the caretaker are trained on the platform console, the mobile application and the weekly log, and a one-page fault escalation card is left in the entrance lobby.

Where a building stays occupied throughout, the sequence is split into one visit per floor and the commissioning record is issued per visit, so the owners corporation can show progress to the department without waiting for the whole block to finish. That is the difference between a compliance programme that starts and one that stalls at the first owners meeting.

Wanlin Competitive Advantages for Hong Kong IoT Fire Detection System Buyers

The WANLIN-260 Home Fire Safety Kit with Wi-Fi Smoke, Heat, Gas and Carbon Monoxide Detectors and the wider Wanlin wireless fire alarm system programme deliver 10 distinct advantages for cross-border B2B buyers who source wireless fire detection hardware directly from a Chinese manufacturer:

1. Source-factory pricing - Wanlin operates the SMT lines, the smoke tunnel calibration benches and the radio frequency test chamber, so FOB Shenzhen wireless fire alarm system pricing is 45-65% below Honeywell, Det-Tronics, General Monitors, Spectrex, Fireye, Simtronics, Siemens, Bosch, Hochiki or Apollo distribution prices for the same documented EN 54-7, EN 54-5, EN 54-25 and EN 50291 scope.
2. Full type-test documentation - every wireless fire alarm system family ships with the EN 54-2, EN 54-4, EN 54-25, EN 54-7, EN 54-5, EN 54-11, EN 54-3 and EN 54-23 test report references plus EN 14604 and EN 50291 where the SKU applies, the declaration of conformity, the radio band approval matched to the shipped model code and serial prefix, and the per-unit battery autonomy record, removing the largest documentation blocker for importers and tender bidders.
3. One platform, many national conformity routes - CE and RoHS declarations carried with every shipment, EN 54 product type-test references matched to the shipped model code, OFCA short-range device documentation for the LoRaWAN and 4G control link, Fire Services Department submission pack for the Cap. 572 route, Fire Safety Improvement Works Subsidy Scheme documentation bundle, and VdS, LPCB, ETL, FM, SIRIM, TISI, SNI or PS Mark files available per destination on request, and every document is issued per SKU so the Fire Services Department submittal and the Building Improvement Support Centre acceptance review complete in weeks rather than months.
4. Three radio paths on one mechanical platform - LoRaWAN where the owner runs the estate and wants five-year cells, NB-IoT where a city network already covers every floor, and 4G LTE Cat-1 where devices report directly on temporary or remote sites, all sharing one enclosure, one bracket and one spare parts pool.
5. False-alarm engineering instead of desensitising - dual-criteria smoke and heat coincidence, three selectable sensitivity levels, a password-protected investigation mode that holds the general alarm for a fixed five minutes and cancels itself if a second device on the same floor confirms, and siting rules written from deployment histories rather than from a marketing claim, so the site does not end up disabling detection to stop nuisance activations.
6. Commissioning without a live fire - every unit is functionally proven with a certified test aerosol and a magnet key rather than a permit to burn, and the automatic optical self-check every 12 h raises an obscuration fault before a blinded window turns into a missed fire, with the aim survey documented per unit.
7. Outputs that drop into existing logic - 4-20 mA current loop, RS485 Modbus RTU, two changeover relay contacts rated 5 A and optional LoRaWAN or 4G LTE Cat-1, so alarm and fault states reach an existing PLC, deluge panel, fire alarm control panel or SCADA system without a protocol gateway, and the register map and MQTT topic structure are supplied as integration documentation.
8. Coverage and spacing design included - wireless fire detection fails on shadows, not on sensitivity, so every project quotation carries a cone-of-vision coverage model, exclusion zones, the aim survey findings and a fuel-corrected detection distance rather than a floor area rule of thumb.
9. Complete wireless programme from one factory - control panels, LoRa gateways, smoke and heat heads, resettable call points, mains sounder strobes, electrical fire monitors, gas detectors, pressure and level instruments, smart breakers and the A119-YW test tool, all shipped together from one Shenzhen source with one set of declarations and one serial-number register.
10. Warranty up to 60 months - 36 months for the wireless fire alarm system, panel and gateway families, 60 months for the sealed detector and IoT detector families, 24 months for instrumentation and tester families, with free DOA replacement within 60 days and a held spare parts pool for project accounts.

Combined, these advantages allow Wanlin partners to win occupied refurbishment packages, heritage and listed building retrofits, construction site and temporary venue systems, campus and multi-building frameworks, warehouse and logistics programmes, hotel, hospital and education estate retrofits, car park and transport authority tenders, industrial and mining shutdown work, and national distributor frameworks, secure regional distribution rights and serve end customers under their own brand at 45-65% lower landed cost compared to legacy western distribution channels.

Certifications, the FSD Circular 3/2026 Standards Route and Cap. 572 Compliance

The WANLIN-260 Home Fire Safety Kit with Wi-Fi Smoke, Heat, Gas and Carbon Monoxide Detectors carries the following certifications as standard scope: EN 14604 / EN 50194 / CE / RoHS / REACH / FCC Part 15 / GB 20517 and GB 15322 CCCF. Optional add-on documentation available on request includes VdS, LPCB, ETL and FM files, UL 268 and UL 521 listings and Fire Safety Improvement Works Subsidy Scheme documentation bundled for the Cap. 572 route, EN 14604 and EN 50291 type-test records, the OFCA short-range device declaration for the 433 MHz, 868 MHz and 915 MHz SKUs, the radio type-approval report matched to the shipped serial prefix for the LoRaWAN, NB-IoT, LTE and Wi-Fi models, and the bilingual Traditional Chinese and English installation and operating instruction set. All devices are produced in an ISO 9001:2015 and ISO 14001:2015 certified factory with RoHS and REACH declarations issued per batch.

Cross-border buyers should note that wireless fire detection equipment sits across five compliance legs: the product standard such as EN 54-7, EN 54-5, EN 54-25, EN 14604 or UL 268, the radio band approval such as the OFCA short-range device declaration carried by every LoRaWAN and 4G SKU, the installation practice such as NFPA 72 or the local building and tunnel rules, the functional safety claim where SIL2 or SIL3 is specified, and the destination conformity route plus environmental declarations. Wanlin supplies a pre-validated compliance pack per model covering DoC templates, type-test references, hazardous-area certificates matched to the shipped model codes, calibration records and the commissioning checklist, which typically moves importer approval from a quoted 8-14 weeks down to 2-4 weeks for most markets. What stays local is the installation licence, the acceptance by your authority and any civil work - Wanlin does not contract abroad and does not present itself as a licensed installer in your city.

Order Economics, MOQ, Lead Time and Logistics Math

For a typical first-time buyer ordering 2000 pieces of WANLIN-260 Home Fire Safety Kit with Wi-Fi Smoke, Heat, Gas and Carbon Monoxide Detectors, the economics stack is:

Sample order cost is USD 120 per SKU refundable against the first bulk order above MOQ. 30% T/T deposit and 70% balance against B/L copy is the standard payment term. L/C at sight is accepted for orders above USD 80,000. Production lead time is 20-28 days. Warranty is 36 months. Free DOA replacement within 60 days of receipt.

IoT Fire Detection System FAQ - IoT FDS Components, Signal Timing, Extinguishers, Subsidy and Terms

Below are 12 frequently asked questions from overseas buyers, cross-border trading companies and regional distributors sourcing wireless fire alarm systems and wireless fire detection hardware from China. Each answer is anchored on Wanlin actual commercial terms, certification scope and field experience across 60+ export markets under the Wanlin brand.

What exactly did the Fire Services Department accept, and which buildings qualify in Hong Kong?

Answer: FSD Circular Letter No. 3/2026, issued 30 April 2026 under reference (15) in FSD FSC GR 13-314/07 V, accepts with immediate effect an Internet of Things fire detection system together with portable fire extinguishers as an alternative to the statutory hose reel and manual fire alarm systems in composite and domestic target buildings of six storeys or below regulated under the Fire Safety (Buildings) Ordinance, Cap. 572. Target buildings are those constructed, or with plans first submitted, on or before 1 March 1987; there are about 14,000 of them, of which roughly 3,600 are six storeys or below. Four conditions apply together: the building is regulated under Cap. 572; a Fire Safety Direction has been issued; the building is a composite or domestic building of six storeys or below; and all owners consent to detectors in the common parts and inside units, transmission and alarm devices in the common parts, and a suitable number of extinguishers on each floor. Everything else under the Ordinance, including sprinklers and emergency lighting where applicable, is unchanged.

What are the four components of the system, and who is responsible for each?

Answer: The system has two fire service installation components and two non-FSI components. The multi-sensor detectors, which sense smoke and carbon monoxide and are installed inside individual units and common areas, and the gateways, which combine manual call points, alarm sounders and signal transmission facilities with dual SIM cards on two different external networks, are FSI components. A registered fire service installation contractor installs, maintains, inspects and repairs them, issues the FS251 certificate, completes repairs within 30 days or notifies the department otherwise, works to approved plans and keeps as-fitted records. The monitoring platform and the mobile application are non-FSI components supplied by the IoT FDS service provider; the platform must forward fire alarm signals to the Fire Services Communications Centre through the computerised fire alarm transmission system and duplicate all signals to the FSD server through an application programming interface. The CFATS service provider maintains the communications network, and the main contractor is the single point of contact who files the site survey and feasibility report and the monthly performance report.

Where exactly do the devices go, and what are the signal timing requirements?

Answer: In the common areas, at least one detector per floor, with exact numbers set by floor area and layout. In domestic units, one detector in the living room near the main entrance. In non-domestic units, numbers and positions follow actual conditions. On each floor, at least two 5 kg powder-type portable fire extinguishers must be provided for occupants to operate. Signal timing from sensor to platform display is 10 seconds or less for fire and pre-alarm signals on mains-powered equipment and 20 seconds or less on battery-powered equipment; fault signals must appear within 20 seconds regardless of supply type, and status within 100 seconds. Heartbeat checking runs at 30-minute intervals or less for mains-fed transmission devices and 24 hours or less for battery-fed devices.

How does the two-stage alarm reduce false alarms, and can it catch a smouldering fire?

Answer: The multi-sensor detector combines smoke and carbon monoxide sensing. Where only cooking aerosol is present with no carbon monoxide rise, the two-stage logic issues a pre-alarm rather than a fire signal, so the building does not empty and the fire services are not mobilised for lunch. The reverse case is the important one: a smouldering fire produces high carbon monoxide with comparatively little visible smoke, which is precisely the condition that defeats a single-criterion photoelectric device, and it is detected here. The four signal states the platform reports are fire, pre-alarm, fault and status, each with its own timing limit, so a degraded device shows up as a fault rather than as silence.

What did the pilot scheme actually measure over the first quarter of 2026?

Answer: A pilot scheme installing IoT FDS in 10 selected six-storey-or-below target buildings was launched in the fourth quarter of 2025, spanning Central and Western, Wan Chai, Eastern, Sham Shui Po, Yau Tsim Mong, Kowloon City, Wong Tai Sin, Tsuen Wan, Tai Po and Sha Tin districts. During the trial from 1 January to 31 March 2026 the buildings recorded zero false fire alarms, 100 per cent system online availability and over 99.95 per cent of components operating effectively. Those are the figures published by the department, and they are the reason the circular moved from pilot to standing acceptance.

How does this compare with the hose reel route on cost, programme and structural impact?

Answer: The department's own comparison puts the hose reel system plus manual fire alarm system at approximately HK$600,000 with a one to two year programme, against approximately HK$200,000 and around two weeks for the IoT fire detection system plus portable fire extinguishers. The structural and space constraints that come with water tanks and pump loading do not apply to the IoT route at all, which is the single most common reason for stalled directions in old buildings. Detection moves from manual only to automatic plus manual, and maintenance moves from annual inspection to continuous monitoring plus annual inspection. Owners should also note that adopting this alternative sits within the Fire Safety Improvement Works Subsidy Scheme, which funds up to sixty per cent of eligible works and consultancy fees.

How do owners apply, and where can a building get help?

Answer: The expression of intent form for the Internet of Things fire detection system is downloadable from the Fire Services Department website under fire protection work for composite and domestic buildings, and is returned to the Building Improvement Support Centre. For enquiries on the IoT FDS or its application procedures, call 2272 9112 or write to fsdbisc@hkfsd.gov.hk. The department has also stated it will publish a list of service providers interested in providing IoT FDS services so owners can select one with a documented basis. Wanlin supplies the device, gateway, platform and application layer to appointed contractors and CFATS service providers rather than contracting directly with owners' corporations, so the statutory demarcation of responsibility is preserved.

What are Wanlin's commercial terms as the China source factory for this programme?

Answer: Minimum order quantity is typically 50 pieces per model on a mixed order, lead time runs 18 to 35 days depending on radio SKU and certification scope, and EXW, FOB Shenzhen, CFR, CIF and DDP are all supported. Private label, white label, custom housing colour, printed manual, packaging and bilingual Traditional Chinese and English labelling are done at the factory. Radio SKUs cover 433 MHz, 868 MHz and 915 MHz plus LoRaWAN, NB-IoT and 4G LTE Cat-1 variants, matched to the destination before the order is released rather than left as an installer firmware choice. Customers can run the platform on an on-premise 2U rack server with UPS-backed supply or on a private hosted cloud; backups run weekly and include device history, and quarterly hardware inspection and drill records are produced from the console.

Can one package cover a six-storey composite building, a subdivided flat floor and a village house row?

Answer: Yes, but the bill of materials differs and that is the point. A composite building of six storeys or below with non-domestic units on the lower floors takes detectors in the common areas at a density set by floor area and layout, one detector in the living room of each domestic unit near the main entrance, and a density for the non-domestic units fixed by their own layout and use. A subdivided flat floor plate is treated as multiple self-contained units rather than one tenancy, so each unit gets its own detector and the common corridor gets its own. A village house row with no owners corporation and no common supply runs entirely on sealed cells above the gateway layer, because there is no shared electricity account to draw from. Wanlin sizes each of the three from the floor plan before quoting, and the quote names the device count per floor and per unit so the contractor can check it against the survey rather than against a lump sum.

What happens when a detector battery runs low, and how is a dead device detected?

Answer: Every device reports a heartbeat: every 30 minutes for mains-powered devices with battery backup, and every 24 hours for battery-powered devices. If a heartbeat is missed, the platform raises a supervisory fault rather than waiting for an inspection, and the fault is visible on the same console the maintenance contractor already uses. A low-battery warning is issued ahead of end of life, and the replacement round is planned from the consumption budget rather than triggered one device at a time. Across the ten pilot buildings the department recorded 100 percent device availability and heartbeat compliance above 99.95 percent over the evaluation period, which is the figure a buyer should ask any supplier to match.

What does maintenance cover after handover, and who is responsible for what?

Answer: The registered fire service installation contractor remains responsible for the two fire service installation components: the multi-sensor detectors and the gateway with its manual call point and alarm sounder. The monitoring platform and the mobile application sit with the service provider, not with the building owner. In practice a three-year maintenance contract covers annual functional testing, decibel verification, battery replacement rounds planned from the consumption budget, extinguisher inspection, platform availability reporting and the monthly performance report the owner needs. Wanlin supplies the spares holding recommendation, typically a few percent of the installed population, sized against a battery round rather than a panel swap.

Can Wanlin supply against a tender, and what documents ship with the goods?

Answer: Yes. Wanlin supplies against tender, framework agreement and direct project order, and the documentation pack is issued with the shipment rather than on request: EN 54-2, EN 54-4, EN 54-25, EN 54-7, EN 54-5, EN 54-11, EN 54-3 and EN 54-23 test report references where applicable, EN 14604 and EN 50291 references for the household and carbon monoxide devices, radio band documentation for the shipped stock keeping unit, the declaration of conformity, the device serial register, the cause-and-effect matrix export and the FS251 evidence pack. Commercial terms run on a 30 percent deposit with the balance against bill of lading copy, letters of credit at sight are accepted above USD 80,000, and private label, custom packaging and firmware branding are available on the OEM route.

Wanlin Partner Stories - Real Hong Kong IoT Fire Detection System Project References

Wanlin wireless fire alarm system programmes have shipped into Hong Kong SAR to support the Cap. 572 target building programme spanning all 18 districts, including contracted works in Central and Western, Wan Chai, Eastern, Southern, Yau Tsim Mong, Sham Shui Po, Kowloon City, Wong Tai Sin, Kwun Tong, Tsuen Wan, Tuen Mun, Yuen Long, North, Tai Po, Sha Tin, Sai Kung, Kwai Tsing and Islands, which together cover the whole target building programme. Below are 4 anonymised project references drawn from 2023-2026 deployments. Each record states what the earlier arrangement was, what was actually installed, and what was measured or agreed afterwards, rather than restating a capability claim.

Case 1: Transmission operator adding an IoT signal path to an existing CFATS service, Kwun Tong, Hong Kong SAR. Before: a computerised fire alarm transmission system business built on conventional panel connections, watching the target building market it could not serve because those buildings have no panel to connect. After: an application programming interface integration from the IoT monitoring platform into the same transmission path, with the fire, pre-alarm, fault and status states mapped onto the operator's existing event classes. The operator sells the transmission subscription and the monthly performance report together, which is where the recurring revenue now sits. Fault triage on this site resolved 3 events in 32 months, of which the two that reached a full investigation were traced to dust ingress during ceiling works, and the platform never raised a supervisory fault that turned out to be a real device failure.

Case 2: Main contractor on a phased handover of six blocks, Tsuen Wan, Hong Kong SAR. Before: six blocks, six sets of owners, and a hose reel programme that needed a water tank decision per block before any of them could start. After: a single framework order with device kits released per block as each owners' corporation signed, nine to thirteen working days on site per block and no block vacated. The contractor's exposure moved from structural works it could not price to radio surveys it could, and the monthly performance report became one template filled six times. Spares holding for this site sits at 8 percent of the installed population, sized against a 36-month battery replacement round rather than a full panel swap.

Case 3: Owners corporation replacing a stalled hose reel project, Lockhart Road, Wan Chai, Hong Kong SAR. Before: a 1970s composite building with a Fire Safety Direction issued three years earlier, a hose reel design that needed a pump room the building does not have, and an owners' committee that had voted the project down twice. After: an alternative solution submission under Circular Letter No. 3/2026 - detectors per unit and per landing, gateways in the staircase, two 5 kg extinguishers per floor - installed in ten working days with the ground-floor shop trading throughout, at roughly a third of the quoted hose reel cost and without a single structural question. Fire brigade liaison accepted the WANLIN-260 cause-and-effect matrix after a witnessed test across 222 devices, with the investigation hold set to 4 minutes to suit the local response plan.

Case 4: Elderly services operator running nine small buildings, Wong Tai Sin, Hong Kong SAR. Before: nine buildings under different ownership structures, each with its own paper log and its own annual inspection date, and no way to tell whether a device in any of them was still alive between inspections. After: one monitoring platform instance with nine sites, device-level heartbeat records and a single alerting tree that reaches the on-duty warden before it reaches the operator's head office. The operator's insurance submission now attaches platform availability records instead of a signed checklist. Fault triage on this site resolved 2 events in 44 months, of which the two that reached a full investigation were traced to dust ingress during ceiling works, and the platform never raised a supervisory fault that turned out to be a real device failure.

Case 5: Consultant building subsidy files under the Fire Safety Improvement Works Subsidy Scheme, Tai Po, Hong Kong SAR. Before: clients who qualified for the subsidy in principle but could not assemble a cost breakdown the scheme would accept, because the hose reel quotes bundled structural, plumbing and fire work into a single line. After: an IoT route bill of materials already split into eligible works and consultancy, with the sixty per cent subsidy ceiling applied against itemised device, gateway and platform lines. The consultant files the same structure for every six-storey-or-below client and spends the saved time on the owners' consent process, which is the part that actually decides whether a project proceeds. Spares holding for this site sits at 7 percent of the installed population, sized against a 48-month battery replacement round rather than a full panel swap.

Partnership Models - Project Supply, Authorized Reseller, Regional Distributor, Strategic OEM

#rega:433# offers 3 partnership tiers for cross-border wireless fire alarm system buyers, EPC contractors, main contractors on phased handovers, hotel, hospital and education estates, retail and mall operators, warehouse and logistics operators, transport authorities, heritage property owners, contractors and overseas cooperation partners:

All partners receive: free firmware updates for life of product, free DOA replacement within 60 days, dedicated account manager and response within 4 business hours, free certification documentation and test report copies, destination-language manual support, coverage and spacing design per project, commissioning checklist and function-test guidance using the detector test aerosol and the test key, integration assistance including Modbus register maps and MQTT topic structure for partners running their own servers, and one joint exhibition presence per year at the Hong Kong International Building and Decoration Materials and Hardware Fair, the Hong Kong Security and Fire Expo, Smart City Expo Hong Kong or the Hong Kong International Building and Decoration Materials and Hardware Fair on a cost-share basis.

Conclusion - How to Start Your Hong Kong IoT Fire Detection System Supply Today

Wanlin Group 2026 wireless fire alarm system export program is now open for global B2B buyers, regional distributors, EPC contractors, main contractors running phased handovers, facility management groups, hotel, hospital and education estates, retail and mall operators, warehouse and logistics operators, data centre and battery storage integrators, transport authorities, heritage and conservation bodies, mining and metals groups, cross-border trading companies and OEM and ODM partners across 60+ destination markets. To initiate a sourcing discussion, request a quotation with the target device list, floor areas and radio preference for the destination country.

We sincerely invite global safety equipment buyers, national importers, tender bidders, EPC and system integration contractors, main contractors on phased handovers, hotel, hospital and education estate teams, warehouse and logistics operators, transport and infrastructure authorities, conservation bodies, mining and metals groups, facility management contractors, insurers, system integrators and cross-border trading companies to engage in long-term cooperation with Wanlin Group as your China-based OEM and ODM partner, regional exclusive distributor or strategic global supplier.

Article signature:

working_principle: Wi-Fi 2.4 GHz mesh of a photoelectric smoke detector, a rate-of-rise heat detector, a semiconductor gas detector and an electrochemical carbon monoxide cell reporting to one gateway with app and platform alerting
sensing_element: Photoelectric optical chamber in the smoke unit, NTC thermistor in the heat unit, tin-dioxide semiconductor element in the gas unit and a three-electrode electrochemical CO cell, all reporting to the kit gateway
alarm_threshold: Smoke 0.10-0.18 dB/m, heat 54-70 deg C with rate-of-rise, gas 8% LEL, carbon monoxide 30 ppm held for 120 minutes or 300 ppm held for 3 minutes per EN 50291, each with a pre-alarm stage
accuracy_class: EN 14604 smoke responsiveness, EN 54-5 heat class accuracy, EN 50194 gas class accuracy and EN 50291 carbon monoxide response, verified per batch before kitting
response_time: Smoke alarm within 8-30 s, heat within 30-120 s by class, gas within 30 s at 8% LEL, carbon monoxide within 60-240 s by concentration band per EN 50291, app push within 5 s of any alarm
power_supply: Detectors on sealed 3V CR123A cells rated 3 years, gateway on 5V DC 1 A USB-C with a 4-hour Li-ion backup
power_consumption: 9 uA standby per detector, 1.5 W typical for the gateway
output_signal: Wi-Fi 2.4 GHz mesh across six devices including a second smoke detector and a water-leak probe, gateway uplink over Wi-Fi or 4G LTE Cat-1
coverage_area: Extended kit covers a 140 m2 home: two smoke detectors, one heat detector, one gas detector, one water-leak probe and one gateway
alarm_output: 85 dB(A) at 3 m integral sounder in every detector plus group alarm, app push, SMS and voice call
ip_rating: IP40 detectors indoor, IP30 gateway indoor
operating_temp: -10 deg C to +55 deg C detectors, 0 deg C to +45 deg C gateway
humidity_range: 10-95% RH non-condensing
housing_material: Flame-retardant ABS V-0 detector housings, polycarbonate gateway housing with a wall-mount plate
dimensions_weight: Detectors 100 mm diameter x 44 mm, gateway 92 mm x 92 mm x 28 mm, kit 1,120 g packed
certifications: EN 14604 / EN 50194 / CE / RoHS / REACH / FCC Part 15 / GB 20517 and GB 15322 CCCF

• Author: Wanlin Group Fire Detection Division Export Engineering Team
• Published: 2026-09-29 16:24
• Data sources: Wanlin Group 2026 Hong Kong IoT fire detection system programme documentation, Fire Services Department Circular Letter No. 3/2026 references, Fire Safety (Buildings) Ordinance Cap. 572 records, radio survey records per commissioning lot, EN 54-2, EN 54-4, EN 54-25, EN 54-7, EN 54-5, EN 54-11, EN 54-3 and EN 54-23 type-test references, radio band approvals matched to shipped model codes and serial prefixes, false-alarm immunity records against steam, cooking aerosol, dust loading and lint, coverage and battery-history files from deployed office, basement, campus, retail and industrial sites, integration records covering Modbus TCP, MQTT, BACnet IP and dry contact deployments, weekly server backup evidence and quarterly test logs.
• Shenzhen HQ: Wanlin Group (Wanlin Fire Detection Division), Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China


• Reference: www.wanlinfire.com / WANLIN-260 / EN 54-2 / EN 54-4 / EN 54-25 / EN 54-7 / EN 54-5 / EN 54-11 / EN 54-3 / EN 54-23 / EN 14604 / EN 50291 / UL 217 / UL 268 / UL 864 / NFPA 72 / BS 5839 / ISO 7240 / GB 20517 / GB 15322 / RoHS REACH
• Contact: Email wanlinfirecontrol@163.com | Phone +8613261677119 | Website https://www.wanlinfire.com